SDS

No.
1 5.1.1
Appearan
ce
3 6.1 O.C.V.
4 6.2
Service
output
test
6 /
Packing
&
Marking
Manager
Check
Approval
7.1
Dimensio
ns
Leakage
2
5
5.1.2
JunPing Liu
Lihui Chen
HangJun Wu
Appearance etc
ISO 2859-1 I ,
AQL 1.0
According Order
Form
4/F, Hongwan Commercial Building, 4235# Bao'an
District，518126, Shenzhen
Tel:[phone]
http://www.allkeybattery.com
High Temp
N=10
Ac=0, Re=1
Over discharge
N=9
Ac=0, Re=1
Voltage
ISO 2859-1 I , AQL 0.15
1.50~1.68volts
3.9Ω
Cont’-0.9V
N=9
Ave≥2.25hrs
Appearance &
Terminal
ISO 2859-1 I , AQL 1.0
See 5.1.1)
Height
43.5~44.5mm
Diameter
9.8~10.5mm
ISO 2859-1 S-2, AQL 1.0
Carton Box
60pcs×24Box
1440
Corrugated carboard
8. Reliability test item and criteria
Item No.
Test Item
Sampling Plan
Judgment
Standard
Cell
4cell
4
Shrinkable PVC Film
Display Box
4×15pack
60
Paperboard
placing an order.
1) Total mercury contents of less than 1ppm of a battery weight.
2) Total cadmium contents of less than 20ppm of a battery weight.
3) Total lead contents of less than 40ppm of a battery weight.
7.3) Packing method
/
composition
Quantity(pcs)
Materials
2) Over-Discharge
After service output test, continuous discharge carried out for the same specimens until on load voltage drop
for the first time below 40% [0.6volts] of the nominal voltage of battery. After discharge visually
inspecting within 1hours shall be not deformation, leakage findable.
7.2) Heavy metal Contents
Safety or environment regulations and laws are must be inform or discuss with DMEGC prior to
7.1) Leakage
1) High temperature
The batteries shall be stored in the unpacked condition under the 60±2℃,related humidity 90%
for 30 days.
After storage visually inspecting shall be no deformation, electrolyte leakage findable.
- Sample size N=10, Ac=0, Re=1.
Part No.
ALLKEY-LR03-2017
Page
7/9
7. Environmental Characteristics and standard
Prepared Date
2017/1/3
Approved Date
2017/1/3
Part Name
Alkaline Primary Battery - LR03 
Version
C/0
SPECIFICATIONS