Owners manual

WARN® INDUSTRIES PAGE 1 68949 Rev B0

INSTALLATION INSTRUCTIONS

ATV BUMPER

Part Number: 68766

Application: ‘04 Honda Rancher

As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a

specific purpose. NOTES are additional information to help you complete a procedure. CAUTIONS are

safety messages that indicate a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury. A CAUTION may also be used to alert against unsafe practice or possible equipment

damage. WARNINGS are safety messages that indicate a potentially hazardous situation, which, if not

avoided could result in serious injury. CAUTIONS and WARNINGS identify the hazard, indicate how to avoid

the hazard, and advise of the probable consequence of not avoiding the hazard. PLEASE WORK SAFELY!

II. Tools Required

• Ratchet

• Sockets: 10mm, 12mm, 7/16”

• Allen Wrenches: 5mm

I. Parts List

Ref Description Qty

A1 Rancher Bumper 1

A2 Mounting Bracket 1

B1 1/4” lock washer 2

B2 1/4-20 x .75” bolt 2

B3 6mm x 1.0mm x 25mm bolt 2

B4 Spacer 2

PAGE 1
INSTALLATION INSTRUCTIONS ATV BUMPER Part Number: 68766 Application: ‘04 Honda Rancher As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a specific purpose. NOTES are additional information to help you complete a procedure. CAUTIONS are safety messages that indicate a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. A CAUTION may also be used to alert against unsafe practice or possible equipment damage.
PAGE 2
III. Rancher Bumper Installation 1. 2. Remove the two front fasteners securing the plastic facia to the bottom of the ATV rack, figure 1. These fasteners will be replaced with new fasteners that came in the kit. Plastic Fascia Remove Fasteners Remove the two side 8mm bolts holding the front skidpan into position, figure 1. These fasteners will be reused in the installation of the bumper. Remove Fastener Remove Fastener Front Skidpan Figure 1 Remove Fasteners 3.