Owners manual

©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc. 4 86299A1
INSTALLATION INSTRUCTIONS
KYMCO FRONT PLOW MOUNT INSTALLATION
1. Remove the four bolts that secure the front facia plastic, as
shown in gure 1.
NOTE: Make sure there are no other accessories installed on
vehicle.
2. Lay the front plow mount right over the factory winch mount
as shown in gure 2.
NOTE: Make sure that you have installed the spacers under
the mounting plate that were supplied in the kit. See
Figure 2B.
Figure 1
Figure 2
Figure 2B