Owners manual

©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc. 6 86299A1
6. Attach the yellow and blue power leads to the winch before
dropping into place. Make sure to use the black terminal
protective covers on the cables. Tighten the leads to the
winch at this time. See gure 6.
7. Note that as you are dropping the winch into place that the
terminal covers are in place and the winch cable is started
through the fairlead. This makes the installation easier. See
gure 7.
8. If you haven’t already install the winch hook now as shown
in gure 8.
Figure 7
Figure 8
Figure 6