User Guide

987604A1.doc Page 22 of 48
2.5 WIRE ROPE ASSEMBLY
2.5.1 REMOVAL OF WIRE ROPE
Note:
Prior to disassembly:
1. Spool out all Wire Rope.
2. Use of gloves is recommended while handling frayed or damaged Wire Rope.
3. Unplug unit before disassembly.
Tasks:
Disassemble the Drum and Wire Rope.
1. Push the Wire in the direction of the
arrow mark as shown in the figure.
2. Using a punch or drift and hammer, hit
the end of the Wire Rope to push the
loop back through the Drum.