User Guide

987604A1.doc Page 44 of 48
8. Use 2 Retaining Rings to lock Power Cord
with the Plastic Housing in opposite
direction.
9. Install Rocker Switch to Right Plastic
Cover and connect corresponding lead
Wires.
2.9.3 INSPECTION OF WIRING
• Visual Inspection.
• Ensure that Switches have assembled correctly. Wiring is complete match the drawing and
pin-out table for corresponding switch.
• Ensure that Wiring has not jammed in Housing. Direction Switches slider assembled
correctly.
• Ensure green Ground wire is securely attached to chassis.