Other Content

ManualsBrandsWarn ManualsAutomotiveWARN 90451 'ProVantage 4500-S' Winch - 4500 lb. Capacity

Warn Industries, Inc. 89357A1

PROVANTAGE 4500-S

Part Number: 90451, 91046

Rated Line Pull: 4500 lbs. (2041 kgs)

Motor: 12V DC, 1.9 hp (1.4 kW) Permanent Magnet

Controls: Remote and Dash Mounted Lighted Rocker Switch

Gear train: 3-Stage Planetary

Gear Ratio: 154:1

Clutch (Freespool): Sliding Pin and Ring Gear

Brake: Roller Disk

Drum diameter/length: 2.25”/4.7” (57mm/119mm)

Kit Shipping Weight: 28.5 lbs. (12.9 kgs)

Rope: Synthetic, Ø 7/32” x 50’ (Ø 5.5mm x 15.2m)

Fairlead: Hawse

Recommended Battery: 14 AH minimum

Duty Cycle: Intermittent

Battery leads: 6 gauge

Finish: Black Powder Coat

Warranty: Limited Lifetime

Mounting Bolt Pattern: 3.0” x 6.66” (76mm x 169mm)

Winch Dimensions: 14.42” L x 4.51” D x 4.69” H (36.6cm L x 11.5cm D

x 11.9cm H)

Winch Weight: 15.6 lbs. (7.1kgs)

Warn Industries, Inc. 89357A1

PERFORMANCE DATA

Pull by Layer

Layer/lbs. (kgs.)

1/4500 (2041)

2/3349 (1519)

3/2880 (1306)

4/2526 (1146)

Load Current Speed

lbs. (kgs) (Amps) Ft/min. (m/min.)

4500 (2041) 318 2.9 (.9)

3500 (1588) 241.2 5.7 (1.7)

2500 (1134) 175.0 8.4 (2.6)

1500 (680) 113.7 13.7 (4.2)

500 (227) 54.9 18.5 (5.6)

0 19.1 23.6 (7.2)

Load Run Time Distance Cool Time

lbs(kgs) ft.(m) (min)

0 2.5 min 60 (18.3) 12

500 (227) 2.0 min 37 (11.3) 10

1500 (680) 1.0 min 14 (4.3) 10

2500 (1134) 35 sec 5 (1.5) 10

3500 (1588) 15 sec 1.5 (.5) 10

4500 (2041) 10 sec .5 (.2) 10

DUTY CYCLES

Should you encounter a problem during installation or operation of your

winch, please follow these steps toward resolving the problem:

1. Refer to your operator’s guide and installation instructions. It has

illustrations and detailed information on the installation and safe and

proper operation of your winch. It also includes a replacement parts list

and assembly diagrams. If you are unable to resolve the problem, then

go to step 2.

2. Contact your dealer where you purchased your winch. If, after discussing

the problem with their parts and service staff, you are still unable to

resolve the problem then go to step 3.

3. Call an Authorized WARN Service center from the list provided on the

back of the warranty sheet included with the product. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle.

4. If you are unable to resolve the problem to your satisfaction, please call

Warn Industries Customer Service at: 1-800-543-9276. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle. You may also

contact Warn Industries by visiting our website: www.warn.com

SERVICE INSTRUCTIONS

Summary of content (18 pages)

PAGE 1
PROVANTAGE 4500-S Part Number: 90451, 91046 Rated Line Pull: 4500 lbs. (2041 kgs) Motor: 12V DC, 1.9 hp (1.4 kW) Permanent Magnet Controls: Remote and Dash Mounted Lighted Rocker Switch Gear train: 3-Stage Planetary Gear Ratio: 154:1 Clutch (Freespool): Sliding Pin and Ring Gear Brake: Roller Disk Drum diameter/length: 2.25”/4.7” (57mm/119mm) Kit Shipping Weight: 28.5 lbs. (12.9 kgs) Rope: Synthetic, Ø 7/32” x 50’ (Ø 5.5mm x 15.
PAGE 2
SERVICE/UPGRADE KITS Synthetic Rope Assy 7/32” x 50ft......................................................... PN 77835 Hawse, UTV Kit ................................................................................... PN 89539 Socket Assembly, Remote Control, PV45 .......................................... PN 89542 Contactor Kit 12 VDC, Albright SVC .................................................... PN 76429 Remote Control, PV45, 10ft lead ........................................................
PAGE 3
DONNÉES DE PERFORMANCE TREUIL PROVANTAGE 4500-S Référence: 90451, 91046 Effort en 1ère couche: 4500 lbs. (2041 kgs) Moteur: Aimant permanent 12V DC, 1.9 hp (1.4 kW) Commandes: Télécommande et allumé interrupteur installé sur le guidon tablea Train d’engrenages : planétaire à 3 étages Rapport de démultiplication: 154:1 Embrayage (déroulement en roue libre): Goujon et couronne dentée coulissants Charge Courant lb (kg) (A) 4500 (2041) 318 3500 (1588) 241.2 2500 (1134) 175.0 1500 (680) 113.7 500 (227) 54.
PAGE 4
KITS DE MISE À NIVEAU/ENTRETIEN Ens. de câble synthétique, 0,55 cm x 15 m ....................................... Réf. 77835 Kit de à écubier....................................................................................Réf 89539 Ensemble Prise, PV45, Télécommande .............................................Réf 89542 Contacteur 12 V c.c., Albright SVC.................................................... Réf. 76429 Fil de télécommande, PV45, 3,0 m .................................................. Réf.
PAGE 5
CABRESTANTE PROVANTAGE 4500-S Nº de referencia: 90451, 91046 Tracción nominal del cable: 4500 lbs. (2041 kgs) Motor: 12V DC, 1.9 hp (1.4 kW) Permanent Magnet Controles: Control remoto y interrupteur oscilante iluminado montaje tablea Tren de engranajes: Planetario de 3 fases Relación de transmisión: 154:1 DATOS DE RENDIMIENTO Carga Corriente Velocidad libras (kg) (Amperios) pies/min (m/min) 4500 (2041) 318 2.9 (.9) 3500 (1588) 241.2 5.7 (1.7) 2500 (1134) 175.0 8.4 (2.6) 1500 (680) 113.7 13.7 (4.
PAGE 6
KITS DE SERVICIO / ACTUALIZACIÓN Conjunto de cable sintético de 7/32 pulg. x 50 pies ...... Nº de referencia 77835 Kit de escobén ............................................................... Nº de referencia 89539 Conjunto de casquete, control remoto, PV45 ................. Nº de referencia 89542 Kit de contactor 12 V de CC, Albright SVC...................... Nº de referencia 76429 Control remoto, PV45, cable de 10 pies (3 m) ............... Nº de referencia 64849 Conjunto de casquete, control remoto ...
PAGE 7
PROVANTAGE 4500-S Best.-Nr.: 90451, 91046 Zugkraft: 2041 kg Motor: 12 V DC, 1,9 PS (1,4 kW) Dauermagnet, Versiegelt Steuerung: Fernsteuerung und beleuchteter Wippenschalter am Armaturenbrett Getriebe: Dreistufiges Planetenradgetriebe Übersetzungsverhältnis: 154:1 Kupplung (Freilauf): Gleitstift und Gleitring Bremse: Bremsscheibe Trommeldurchmesser/-länge: 57 mm/119 mm Liefergewicht des Sets: 12,9 kg Seil: Synthetik, Ø 5,5 mm x 15,2 m Seilführung: Gussseilfenster Empfohlene Batterie: Mind.
PAGE 8
WARTUNGS-/AUFRÜST-SETS Synthetikseilsatz, 5,6 mm x 15,24 m .......................................... Best.-Nr. 77835 Klüse, UTV-Set ........................................................................... Best.-Nr. 89539 Anschluss, Fernsteuerung, PV45 .............................................. Best.-Nr. 89542 Schaltschützsatz, 12 V Gleichspannung, Albright SVC ...................Best.-Nr. 76429 Fernsteuerung, PV45, 3-m-Kabel .............................................. Best.-Nr.
PAGE 9
PROVANTAGE 4500-S Artikelnummer: 90451, 91046 Klassad dragkraft, lina: 2041 kg Motor: 12 V likström, 1,9 hk (1,4 kW) permanent magnet Reglage: Instrumentbrädesmonterad och fjärrstyrd belyst vippkontakt Utväxling: 3-stegs planetarisk Utväxling: 154:1 Koppling (frispolande): Skjutbart stift och krondrev Broms: Rullbroms, skivbroms Trumdiameter/-längd: 57mm/119mm Fraktvikt: 12,9 kg Lina: Syntetisk, Ø 5,5 mm x 15,2 m Linledare: Profil Rekommenderat batteri: 14 Ah minimum Driftscykel: Intermittent Batterikablar:
PAGE 10
SERVICE-/UPPGRADERINGSSATS Syntetisk lina, sats, 7/32” x 50’ ....................................................... Art. nr 77835 Gjuten profil för UTV, sats .............................................................. Art. nr 89539 Sockelmonteringssats, fjärrkontroll PV45 ....................................... Art. nr 89542 Kontaktor, 12 V DC, Albright SVC .................................................. Art. nr 76429 Fjärrkontroll, PV45, 3 m. kabel ...................................................
PAGE 11
PROVANTAGE 4500-S Numero Pezzo: 90451, 91046 Trazione nominale linea: 2041 kg Motore: 12 V c.c.
PAGE 12
KIT DI AGGIORNAMENTO/ASSISTENZA Gruppo fune sintetica, 5,5 mm x 15,2 m.............................................. PN 77835 Cubia, kit UTV ..................................................................................... PN 89539 Gruppo della presa, comando a distanza PV45 ................................. PN 89542 Contattore, 12 V c.c., Albright SVC ..................................................... PN 76429 Comando a distanza; PV 45, cavo conduttore di 3 m .........................
PAGE 13
PROVANTAGE 4500-S Número da peça: 90451, 91046 Tração nominal da linha: 2041 kg Motor: 12 V CC, 1,9 hp (1,4 kW) – magnético permanente Controles: Remoto e montado em painel, chave acesa de balancim Trem de engrenagem: Planetário de 3 estágios Razão da engrenagem: 154:1 Embreagem (movimentação livre): Pino deslizante e embreagem anelar Freio: Disco com roletes Diâmetro/comprimento do tambor: 57 mm/119 mm Peso de embarque do kit: 12,9 kg Cabo: Sintético, Ø 5,5 mm x 15,2 m Cabo guia: Guia fixa Bateria recomend
PAGE 14
KITS DE MANUTENÇÃO/UPGRADE Cjto. cabo sintético 5,5 mm x 15 m ..................................................... PN 77835 Guia fixa, Kit UTV ................................................................................ PN 89539 Conjunto de soquete, controle remoto PV45....................................... PN 89542 Kit de contactor 12 V CC, Albright SVC............................................... PN 76429 Controle remoto, PV45, fio de 3 m ......................................................
PAGE 15
PROVANTAGE 4500-S Onderdeelnummer: 90451, 91046 Nominale trekkracht: 2041 kg Motor: 12V DC, 1,4 kW (1,9 pk) permanente magneet, afgedicht Besturing: Afstandsbediening en op dashboard gemonteerde verlichte tuimelschakelaar Tandwielstelsel: 3-traps, planetair Tandwielverhouding: 154:1 Koppeling (vrij draaiend): Schuifpen en ringwiel Rem: Rolschijf Diameter/lengte van trommel: 57 mm / 119 mm Gewicht van set bij levering: 12,9 kg Kabel: Synthetische kabel, Ø 5,5 mm x 15,2 m Kabelgeleider: Sleuf Aanbevolen accu:
PAGE 16
ONDERHOUDS-/UPGRADESETS Synthetische kabel, 7/32” x 50 ft ......................................................... PN 77835 Sleuf, UTV-set ..................................................................................... PN 89539 Aansluiting, afstandsbediening, PV45 ................................................ PN 89542 Schakelaarset 12 VDC, Albright SVC .................................................. PN 76429 Afstandsbediening, PV45, verbindingsdraad van 10 ft .......................
PAGE 17
PROVANTAGE 4500-S Osanumero: 90451, 91046 Nimellinen vetokyky: 2041 kg Moottori:12 V (tasavirta), 1,9 hv (1,4 kW), kestomagneetti Ohjaus: Kaukosijoitettu ja kojelautaan kiinnitettävä, valaistu keinukytkin Hammaspyörästö: 3-vaiheinen planeettapyörästö Välityssuhde: 154:1 Kytkin (vapaakelaus): Liukurengashammaspyörä Jarru: Rullalevy Kelan läpimitta/pituus: 57/119 mm Sarjan kuljetuspaino: 12,9 kg Köysi: Synteettinen, Ø 5,5mm x 15,2m Ohjain: Silmäke Suositeltu akku: 14 Ah vähintään Käyttöjakso: Ajoittainen Akun
PAGE 18
HUOLTO-/PARANNUSSARJAT Synteettisen köyden kokoonpano 7/32” x 50ft..................................... PN 77835 Silmäke, UTV-sarja .............................................................................. PN 89539 Kauko-ohjaimen pistorasiakokoonpano PV45 .................................... PN 89542 Kontaktorisarja, 12 VDC, Albright SVC................................................ PN 76429 Kauko-ohjain, PV45, 10ft johto ...........................................................