Owners manual

WARN INDUSTRIES PAGE 8 85636A1

WARN® and the WARN logo are trademarks of Warn Industries Inc.

Figure 10

VI. INSTALLATION

21. If Warn bumper is not installed, install emblem

over Warn embossing. See Figure 10.

VII. MAINTENANCE/CARE

• Inspect all metal parts and related hardware. Replace all parts that appear corroded, cracked or

deformed prior to use.

• Inspect all nuts and bolts and related hardware prior to each use. Tighten all nuts and bolts that appear

to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately.

• Check skid plates protecting moving or rotating parts of the vehicle . Remove debris that may inhibit the

part from moving freely. Removal of aluminum armor may be necessary to thoroughly clean and inspect

both the vehicle and the aluminum underbody components. Frequency of removal will depend on the

type of terrain conditions experienced. Regular cleaning will help keep product looking good and will

help avoid damage to related components.

Contact Warn customer service with installation issues, comments, concerns, and

questions.

WARN INDUSTRIES, INC

Customer Service Department

12900 SE Capps Road

Clackamas, OR 97015

1-800-543-WARN (1-800-543-9276)

1-503-722-3005 International Fax

www.warn.com

IX. SERVICE PARTS

• PN 75495 Kit Includes: (10) PN 74713

• PN 75496 Kit Includes: (10) PN 74510