Owner's manual

If an Enclosed Electro-Module (20 and 20FBB
brake only) is required, an optional Cover Kit,
Warner Electric part number 5370-101-082, can
be purchased separately to enclose the open
vents in the housing and a cover plate to close
off the back of the Module. Each Cover Kit
includes two (2) covers and four (4) screws and
one (1) cover plate needed to convert a vented
Electro-Module 20 to an enclosed design
(non-washdown) as shown in Figure 12b.
Note: When using these Cover Kits to enclose the
module the covers should be assembled as the
final step.
12
Warner Electric • 800-825-9050 819-0529
Notes: Visit Warner Electric’s website at
www. warnerelectric.com for dimensional
drawings, weights, inertia’s and a complete
offering of our products including clutches,
brakes, and clutch or brake controls and
service parts.
In addition, Warner Electric module products,
controls and service parts information can
be found in our catalog P-1234-WE. Call
815-389-3771 to request any of our catalogs.
Figure 12a
Gen 2
20 Module showing
cover plate
Figure 12b