Manual

ManualsBrandsWarner Electric ManualsEquipmentMCS-103-1

Installation and Operation Manual

P-239-18

819-0478

MCS-103-1 Power Supply

with Single Torque Control

• Easy to install

• Compact unit mounts anywhere

• Convenient terminal strip behind an

easy-to-remove cover

• Internal arc suppression

• Operates with any Warner Electric 90V

Clutches or Brakes

The MCS-103-1 is an enclosed power supply

complete with a cover and mounting provisions.

A brake and clutch may be operated separately

with this power supply-or, two brakes or two

clutches, one unit on at a time, or clutch and ER

brake with both units on at a time. The external

wiring is connected to the terminal strip located

behind the cover.

Specifications

* Contact ratings given will operate all Warner Electric brake and clutch units. However, switches with ratings less than those

given may be used with fractional horsepower units provided the rating is equal to or greater than the coil current.

AC INPUT DC OUTPUT DIMENSIONS

(Approx.)

MOUNTING EXTERNAL SWITCHES

(Furnished by user)

120 VAC

50-60 HZ

1.25 amps

90 VDC for one unit

and adjustable from

0-90 VDC full wave

for second unit.

4-1/2" high

6-3/4" wide

2-3/4" deep

Mounting centers 5-

1/2" wide, 3" high.

Knockouts for 1/2"

conduit.

Double pole, double throw

maintained contact. Minimum

contact rating:10 amp, 28 volt

DC resistive or 10 amp, 120

volt AC inductive.*

Part Number:

6010-448-002

0.68

3.00

4.37

0.56

5.50

ÿ0.18 (4 PLCS)

(14.2)

(76.2)

(111)

(17.3)

(4.6)

(139.7)

Dimensional

2.75

ÿ0.87 BOTH SIDES

6.62

0.12

(22)

(168.2)

(3.05)

(70)

(

1.00

(25.4)

1.06

(26.9)

Summary of content (4 pages)

PAGE 1
MCS-103-1 Power Supply with Single Torque Control Installation and Operation Manual P-239-18 819-0478 Part Number: 6010-448-002 • Easy to install • Compact unit mounts anywhere • Convenient terminal strip behind an easy-to-remove cover • Internal arc suppression • Operates with any Warner Electric 90V Clutches or Brakes The MCS-103-1 is an enclosed power supply complete with a cover and mounting provisions.
PAGE 2
MCS-103-1 Connection Instructions for use with Standard Clutch-Brake combination Wiring Diagram NEUTRAL 120 VAC 50-60 Hz HOT 1 SWITCH (furnished by user) STOP STANDARD 3 4 START 90 VOLT CLUTCH 2 5 6 90 VOLT BRAKE 7 (+) 90 VOLTS (+) ADJUSTABLE OUTPUT (-) 1. Connect the two wires fom the brake to terminals 5 and 7. 2. Connect the two wires from the clutch to terminals 6 and 7. 3. The switch (furnished by user) is connected between terminals 3 & 5 and 4 & 6 as shown in the connection diagram.
PAGE 3
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY WE: WARNER ELECTRIC 31 Industrial Park Road New Hartford, Ct 06057 Nosotros: declare under our sole responsibility that the products of the family WARNER ELECTRIC 31 Industrial Park Road New Hartford, CT 06057 declaramos bajo nuestra propia responsabilidad que los productos de la familia MCS 103-1 MCS 103-1 are exclusively designed for incorporation in another machine.
PAGE 4
Warranty Warner Electric LLC warrants that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which proves to be defective in material or workmanship within a period of one (1) year from the date of original purchase for consumer, commercial or industrial use. This warranty extends only to the original purchaser and is not transferable or assignable without Warner Electric LLC’s prior consent. Warranty service can be obtained in the U.S.A.