Data Sheet

1 K WARNEX texture paint Series 74
Product description waterborne single-component texture paint
Binder type water-acrylic
Gloss level half matt
Solids 52 – 55 %-weight
Recommended dry
70 µm (base coating)
120 µm (total, base + spattered coating)
Theoretical covering rate
Practical average covering rate
Loudspeaker cabinets
VOC-rate Ø 160 g/l
Viscosity initial viscosity Rheolab 1400-1800 mPas / D701/s
application visc. ready for handling
Application parameters high pressure spraying system with a paint pressure tank
air pressure 2 – 4 bar
material pressure 2 – 5 bar
materialhose diameter 13 mm internal-Ø
noozle size 2,0 mm
cross coats 1 – 1 ½
spray distance 30 – 40 cm
thinner De-ionised / distilled water (if needed)
Spraying equipment must be thoroughly cleaned with water directly after use.
Drying
dust free ready for handling through dry thermal forced drying oven curing
15 – 20 min 2 – 3 hours 4 days 60 min / 60°
Crecirculated air
-
Substrate
Adhesion on woods such as MDF, birch plywood und many types of plastics. In any case it is recommended
to do an adhesion test.
Extras
WARNEX texture paint has a high viscosity demanding the use of a paint pressure tank. Because of the fast
initial drying, a closed system is required.
Storage
Frost free, max. 12 months in original unopened containers.
Technical Data Sheet