Installation Guide

Mastic Tape
Part Number Description Length Width
WW-VMP-65 Vinyl-backed 4” 6-1/2”
WW-VMR-40 Vinyl-backed 10’ 4”
WW-RMR-20 Rubber-backed 10’ 2”
WW-MSR-375 No backing 10’ 3-3/4”
• Strong mastic adhesive bonds quickly
• Self-fusing rubber easily conforms around
irregular shapes
• Temperature-stable material resists heat
• Excellent moisture-resistance for
outdoor applications
• Ideal for insulating and padding
Electrical
Filler Tape
Part Number Length Width
WW-EF-15 5’ 1-1/2”
• 1/8” thick butyl-based insulating compound
• Designed for quick void-free insulation
• Easily conforms to irregular shapes
• Non-oxidizing; will not corrode copper or aluminum.
• Ideal for covering split bolts and padding bus bar
connections
WarriorWrap
™
SPECIALTY TAPE
High-Voltage, Linerless
Rubber Splicing Tape
Part Number Length Width
WW-HR-75 30’ 3/4”
WW-HR-10 30’ 1”
WW-HR-15 30’ 1-1/2”
WW-HR-20 30’ 2”
• Primary insulation for electrical connections up to 69kV
• Self-bonding 30 mil EPR rubber
• Easily conforms to irregular shapes
• Linerless design allows quick installation
• Rated for continuous temperatures up to 194°F (90°C
• Withstands short-term temperatures up to 266°F (130°C)
High-Voltage, Linered
Rubber Splicing Tape
Part Number Length Width
WW-HRL-75 30’ 3/4”
WW-HRL-10 30’ 1”
WW-HRL-15 30’ 1-1/2”
WW-HRL-20 30’ 2”
• Primary insulation for electrical connections up to 69kV
• Self-bonding 30 mil EPR rubber
• Easily conforms to irregular shapes
• Liner repels dirt and dust during installation
• Rated for continuous temperatures up to 194°F (90°C)
• Withstands short-term temperatures up to 266°F (130°C)
Linered Rubber
Splicing Tape
Part Number Length Width
WW-RSL-75 22’ 3/4”
WW-RSL-10 22’ 1”
WW-RSL-15 22’ 1-1/2”
WW-RSL-20 22’ 2”
• Primary insulation for electrical wires and cable splices
up to 600 volts
• Self-amalgamating
• Liner repels dust and dirt during installation
• Excellent electrical properties
• Compatible with all extruded dielectric cable insulations
• Rated for 176°F (80°C) maximum temperature
Linerless Rubber
Splicing Tape
Part Number Length Width
WW-RS-75 15’ 3/4”
WW-RS-10 15’ 1”
WW-RS-15 15’ 1-1/2”
WW-RS-20 15’ 2”
• Primary insulation for electrical wires and cable splices
up to 600 volts
• Self-bonding for moisture protection
• Easily conforms to irregular shapes
• High thermal conductivity and flame retardance
• Excellent moisture, UV, corrosion and
chemical resistance
• Rated for 194°F (90°C) maximum temperature
Specialty Vinyl Tape
Part Number Description Length Width
WW-832-DC
Data communications
vinyl electrical tape
66’ 3/4”
WW-HW-75 Harness wrap 60’ 3/4”
• High elongation
• Exceptional adhesion
• Excellent elasticity for covering uneven surfaces
• Resists abrasion, UV and moisture
Friction Tape
Part Number Length Width
WW-FT-75 60’ 3/4”
• Dual-sided rubber adhesive adheres to most surfaces
• High-quality cotton construction
• High tensile strength, penetration protection and
abrasion resistance
• Protects wire and cables from sharp edges
• Ideal for harnessing, binding and bundling
10 11