OFFICIAL WARWICK AMP OWNER MANUAL SWEET 15.3 - SWEET 25.
Congratulations on the purchase of your new Warwick combo. Please read through these instructions before connecting and operating the device. Following the guidelines you will soon will benefit from your new Warwick amplifier. Please keep this instruction booklet handy in case you need to consult it again. Please send the PASSPORT to the address indicated therein. INDEX Protective Circuits Sweet 15.3 Sweet 25.2 5 10 11 Suffix Technical Data 102 Schematic Diagrams 106 107 ENGLISH Sweet 15.3 Sweet 25.
SAFETY HINTS - Please read these instructions - Please heed all warnings Caution: To reduce the risk of electric shock, do not open the amplifier’s case. Avoid exposure to rain or moisture. No user serviceable parts inside, refer all service to a qualified technician. No vessel filled with liquids, such as vases shall be placed on top of the unit. This symbol, wherever it appears, alerts you to the presence of dangerous non-insulated voltage inside the case.
GENERAL INFORMATION For safe and reliable operation please follow these instructions: • DO NOT open the amplifier case! You might receive an electrical shock. For any repair refer to qualified service personnel. • Avoid dust, excessive moisture, direct sunlight and extremely high or low temperatures. • Safeguard the device from impact. Always place the unit on a stable and horizontal surface. • Do not block any of the ventilation openings.
PROTECTIVE CIRCUITS (SWEET 15.3, SWEET 25.2 only) HF oscillation: This safety feature prevents from damages caused by frequencies above 20 kHz (feedback, etc.) by switching the power amp off. Temperature: Should the temperature controlled fan cooler prove to be insufficient in extreme conditions, this circuit protects the output stage transistors from destruction by switching the device off.
FRONT PANEL CONTROLS ENGLISH SWEET 15.3 INPUT GAIN GRAPHIC EQ LOW BOOST HIGH BOOST EFF. LOOP LINE OUT MASTER MUTE PHONES socket to plug in a bass guitar. control + CLIP LED to adjust the input level. 8 band EQ to cut / boost the respective frequencies by +/- 12 dB. switch + LED to boost deep frequencies. switch + LED to boost high frequencies. for the insertion of effect units. Connect EFF. SEND with the input and EFF. RETURN with the output of the effect device.
FRONT PANEL CONTROLS PHONES MASTER control + CLIP LED to adjust the input level. socket to plug in a bass guitar. switch to turn on the compressor and control to adjust the compression rate. switch to turn on the contour and control to adjust the intensity. Boosts bass and treble, cuts mids. control to boost / cut deep frequencies. control to boost / cut low mid frequencies. control to boost / cut high mid frequencies. control to boost / cut high frequencies. switch + LED to boost low frequencies.
TECHNICAL DATA SWEET 15.3 SWEET 25.2 INPUT 25 mV 25 mV PREAMP transistor transistor POWER AMP fan cooled fan cooled SPEAKER 15” 15” EQUALIZER 8 band EQ HI / LO BOOST BASS, HI / LO MID, TREB, VARIABLE CONTOUR, DEEP , BRIGHT COMPRESSOR - adjustable HEADPHONE min 200 Ohm min 200 Ohm EFFECT LOOP mono serial send 0 dBu, 600 Ohm return 0 dBu, 10 kOhm mono serial send 0 dBu, 600 Ohm return 0 dBu, 10 kOhm REAR CONTROL horn switch horn switch NOMINAL POWER 300 Watt 500 Watt THD < 0.
SWEET 15.
SWEET 25.
Please see the new Warwick Bass Forum on www.warwick.de For support information please refer to support@warwick.de Headquarters: Branch China: Branch UK: Branch Switzerland: Branch CZ: Warwick GmbH&Co.Music Equipment KG • Gewerbegebiet Wohlhausen • 08258 Markneukirchen/Germany • E-Mail: info@warwick.de Warwick Music Equipment (Shanghai) Ltd., Co.•Shanghai Waigaoqiao Free Trade Zone • Shanghai 200131/P.R.China • E-Mail: info@warwick.cn Warwick Music Equipment Trading (Manchester UK) Ltd.
