Owner`s manual

ENGLISH
14
TROUBLESHOOTING
When your unit seems not to work properly, take a few minutes to troubleshoot before colling service. You can save yourself
time and money by doing it yourself because the source of the problem is often something quite simple.
WHAT IS THE PROBLEM?
1. There is no sound from the amp and LEDs don’t light up. -> Check your AC outlet.
1.1. Outlet is ok. -> check power cord, unit fuses and power s
witch.
1.2. No power in outlet. -> Check house fuse box.
2. There is no sound from the amp and LEDs light up. -> Check amp gain and/or volume controls, check guitar
controls. If controls are ok and all set above zero then listen for hum in the speaker.
2.1. There is no hum in the speaker. -> Check speaker and speaker cable.
2.2. There is small hum in the speaker. -> Unplug guitar, touch tip of cable a
nd listen.
2.2.1. Hum is now very loud. -> Check your guitar electronics or try different guitar.
2.2.2. Hum does not change. -> Replace your guitar cable.
3. Sound quality is poor. -> Replace your guitar cable. If this does not help then check your speaker and speaker cable.
If problem isn’t covered above or if our solutions does not help then contact Warwick service information.
O
ur Heads and Combos have all the following approvals:
In General China Europa USA USA/Canada
Japan Argentina Brazil Russia Australia