OFFICIAL WARWICK AMP OWNER MANUAL ENGLISH QUADRUPLET
SAFETY HINTS - Read these instructions - Keep these instructions - Heed all warnings - Follow these instructions Caution: To reduce the risk of electrical shock, do not remove the cover. Or expose this appliance to rain or moisture. No user serviceable parts inside; refer serving to qualified personnel. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.
Congratulations on the purchase of the new Warwick Pre Amplifier. Please read through these instructions before connecting and operating the device. If you keep to the guidelines set out in this manual, you will soon be able to appreciate the quality of this new Warwick amplifier. Please keep this instruction booklet handy in case you need to consult it again. Please send the PASSPORT to the address indicated therein.
FRONT PANEL CONTROLS INPUT BASS MID 1 SHIFT 1 MID 2 SHIFT 2 TREBLE LOW BOOST HIGH BOOST QUADRUMATRIX CRUNCH OUTPUT MUTE PHONES POWER Socket for the connection of a bass Rotary control to Cut or Boost low frequencies Rotary control to Cut or Boost low-mid frequencies Switch + LED to set the operating frequency of MID 1 Rotary control to Cut or Boost high-mid frequencies Switch + LED to set the operating frequency of MID 2 Rotary control to Cut or Boost high frequencies Switch + LED to Boost low frequenci
POWERING UP 1. Make sure that the device is plugged in to the mains and that any external (effects) devices are correctly connected and operation-ready. 2. Connect your bass to the QUADRUPLET'S INPUT using a shielded line cable. 3. Turn on the power using the POWER switch. 4. At the conclusion of the valve(tube) warm-up phase turn the MUTE switch off 5. Use the OUTPUT controls to set the desired volume level. 6. Adjust the controls to obtain the desired sound.
TECHNICAL DATA 6 Preamp CH 1 all tubes Poweramp only on dummy load CH 1 Equalizer bass, mid 1 (1+shift), mid 2 (2+shift), treble, low boost and high boost switches Headphone min. 200 Ohms Direct Out 0 dB Effect Loops send -10 dBu return - 10 dBu Switches DI pre/post, line / instrument level Weight (kg) 4.
CIRCUIT DIAGRAM 7
Headquarters: Branch China: Branch UK: Branch Switzerland: Branch CZ: Warwick GmbH&Co.Music Equipment KG • Gewerbegebiet Wohlhausen • 08258 Markneukirchen/Germany • E-Mail: info@warwick.de Warwick Music Equipment (Shanghai) Ltd., Co.•Shanghai Waigaoqiao Free Trade Zone • Shanghai 200131/P.R.China • E-Mail: info@warwick.cn Warwick Music Equipment Trading (Manchester UK) Ltd. • 75 Bridge Street • Manchester M3 2RH / Great Britain • E-Mail: info@warwickbass.co.
