Operating instructions

37
Procedure
0163
0152
Total time
0158
Extract cycle
For safety reasons, there is no manual button for
the extract cycle. There are two choices if
extracting is required during manual operation:
• 1. Select one of the standard programs and
fast forward to the "Extract" cycle.
• 2. Program your own program by draining
and extracting for the required time.
Remember the following when programming: Let
the drain valve be open for at least 30 seconds
before starting the spin cycle and program for
distribution speed during the drain sequence.
Finishing off
• Switch off the activated function so that all
control lamps above the controls go out.
Program statistics
• By selecting program number 00 and pressing
PROG. INFO, the character display shows
program statistics.
• The machine's operating time in hours is
displayed first followed by the number of
programs operated for the different programs.
New programs are brought forward by
repeatedly pressing START/HOLD/
RAPID ADV.
• Press PROG. INFO once again to get back to
the normal position.
66
67
DRAIN
CLOSED
MOTOR FLUSH
PROG.
INFO.
DOOR
LOCK
°C/°F
68
Program number
Number of
programs run
Fig.
66
Fig.
68
Fig.
67
Fig.
67
Fig.
69
HOT
WATER
DRAIN
CLOSED
MOTOR
FLUSH
PROG.
INFO.
DOOR
LOCK
°C/°F
TOTAL RUNTIME 0212 HOURS
PRESS START FOR NEXT PAGE
69
0155
START
HOLD/RAPID ADV.
HEAT
LOW
EXTR.
COLD
WATER