Operating instructions

56
Press:
0222
0167
Programming
Starting from a previously saved
program
If you make a mistake or get stuck, there is
always a final resort:
Turn the key to the RUN position and then to
PROGRAM again. Any programming you
may have carried out so far will be lost but
other programs will not be affected.
Turn the key
Turn the key to the PROGRAM position. The first
question will now be displayed in the display
window.
Select an old program
Answer YES to the question ’’DO YOU WANT AN
OLD PROGR. AS BACKGROUND?’’. Press
ENTER.
Enter the number of the old program to be used.
(NOTE
TWO digits) and press ENTER.
Looking through the program
To rapidly reach the module in the wash program
that is to be altered you can rapid advance
through the program module-by-module by
keeping the EDIT DOWN button continuously
depressed.
To scan backwards through the program use the
button EDIT UP instead. On the right of the
window there is an indicator which shows where
you are in the wash program.
Release the button when you get to the module to
be altered.
Depress ENTER once.
PROGRAMMING MODE
DO YOU WANT AN OLD PROG. AS BACKGROUND? N
YES
ENTER ENTER
Number
keys
RUN
PROGRAM
126
Fig.
126
Fig.
127
Fig.
128
Fig.
129
127
Press:
0224
PROGR.MODE SELECT SEQUENCE MAINWASH 01
EDIT DOWN IN PROGRAM
ENTER
129
Press:
0223
PROGR.MODE SELECT SEQUENCE PREWASH O1
EDIT DOWN IN PROGRAM
EDIT
DOWN
128