Operating instructions

58
Number
keys
Press:
or
or
NEJ
Press:
KLAR
0229
0230
Programming
NO
PROGR. MODE SELECT SEQUENCE PREWASH 01
PAUS WITH BUZZER Y/N Y
NORMAL ACTION DURING FILLING Y/N Y
GENTLE ACTION DURING FILLING Y/N N
PROGR.MODE SELECT SEQUENCE PREWASH 01
NORMAL ACTION DURING FILLING Y/N N
GENTLE ACTION DURING FILLING Y/N N
NORMAL ACTION DURING FILLING Y/N Y
YES
...
ENTER
NOTE
Use only EDIT UP and EDIT DOWN for
looking through the program. ENTER shall
only be used for making changes in the
program.
Making changes to the program
Use EDIT UP and EDIT DOWN so that the
question to be changed is on the third line in the
display window. The cursor (the flashing square) is
on the far left of line three.
Comments on the different questions are found in
the section ’’Programming a new program’’ earlier
in the manual.
Enter the new answer with YES, NO or the
number keys. Then press ENTER.
Deleting sub-programs
It is possible to delete complete sub-programs. Go
to the sub-program to be deleted (see the section
’’Looking through the program’’). Press ERASE.
Answer YES and ENTER to the question ’’ERASE
THIS MODULE Y/N?’’ when you want the whole
sub-program erased.
Adding sub-programs
You can also add new sub-programs anywhere in
the program.
Go to the position between two sub-programs (see
the section ’’Looking through the program’’).
Press one of the following keys: PRE WASH,
MAIN WASH, RINSE, DRAIN, EXTR. or COOL
DOWN. Then press ENTER. The new module is
now inserted between the other two modules and
the questions can be answered in the normal
manner.
EDIT
DOWN
EDIT
UP
and
134
FIg.
134
Fig.
135
Fig.
136
FIg.
137
135
FÖR-
TVÄTT
HUVUD-
TVÄTT
SKÖLJ.
AV-
LOPP
CENTR.
NED-
KYLN.
KLAR
Press:
0232
PROGR.MODE SELECT SEQUENCE
PRE
WASH
EXTR.
ENTER
followed by
DRAIN
COOL
DOWN
any of
MAIN
WASH
RINSE
137
RA-
DERA
Press:
0231
PROGR.MODE SELECT SEQUENCE DRAIN 01
PAUS WITH BUZZER Y/N N
NORMAL ACTION Y/N Y
ERASE THIS MODULE Y/N N
YES
ENTER
ERASE
136