Operating instructions

SoftCare Evo - Type SE10 9-11
Operation mode 2
Procedure
Operation mode 3
Procedure
Chapter 9 - Operating units
The driver drives in front of the wash building, selects
a wash program, drives the vehicle into the building,
leaves the vehicle, starts the wash program and
waits outside of the building.
)
Select the desired wash program on the key-
pad or enter the code.
)
Acknowledge the input with the button
<<OK>> or press the button << Cancel >> if
you would like to change the input.
)
Drive the vehicle into the building.
)
Start the wash program with button <<Start>>.
⇒ The wash program starts. The display shows:
Program x running
The driver drives in front of the wash building, selects
a wash program, drives the vehicle into the building,
remains seated and the wash program starts auto-
matically (Automatic start on).
)
Select the desired wash program on the key-
pad or enter the code.
)
Acknowledge the input with the button
<<OK>> or press the button << Cancel >> if
you would like to change the input.
)
Drive the vehicle into the building.
⇒ The wash program starts. The display shows:
Program x running