Operating instructions
SoftCare Evo - Type SE10 9-13
Chapter 9 - Operating units
Control mode
During control mode, i.e. no wash program running,
a machine element is only selected with a control
button. This machine element can be moved into the
desired direction by using the navigation buttons.
)
Select the desired machine element by using
the control buttons.
⇒ At CP1:
The LED in the lower right corner is
illuminated
At CP0:
The symbol is marked with a black
background
)
Select the desired direction of movement by
using the navigation buttons.
⇒ The element will be moved as long as the
navigation button remains pressed or until the
home position is reached.
The selected element will be deactivated if no navi-
gation button is pressed within three seconds after
selection.
Manual operation can be deactivated to avoid
misuse (see chapter 9.6 „Service programs –
menu 0360“).
The next two pages show the different functions
which may be actuated with the control and naviga-
tion buttons. Thereby the symbols of the operating
terminal CP1 have been used. The symbols of the
operating terminal CP0 are similar.
NOTICE