Operating instructions

SoftCare Evo - Type SE10 9-18
About using service
programs
Calling menu items
Chapter 9 - Operating units
Service programs may not be accessed while
wash programs are executed.
Service programs are structured in several levels. In
each level different operations can be performed.
There is a button called <<Cancel>> on the front
panel. The meaning of this button is Cancel or
Abort.
The menu items within a service program can be
called by using the navigation buttons or by entering
the menu item number directly.
The menu items can be found from page 9-21.
The illustration below shows the direct call of a menu
item. On the next page you will learn how the menu
item is called with the navigation buttons.
Fig. 9-7: Direct call
NOTICE
NOTICE
Direct call of a service program menu item
By entering the number of the menu item directly,
the program jumps immediately to the corresponding
position, e.g. Enter 033 for menu item
Operator/Machine setting/door functions
033> Door functions
Entrance door off
0> Operator
033
3x
Cancel
By pressing the button < > the first
door and the according door settings
are displayed.
Cancel