Operating instructions

SoftCare Evo - Type SE10 9-48
Menu 030
Module On-Off
Chapter 9 - Operating units
)
Press the button <<¨>> to display the mod-
ules.
⇒ The first module is shown:
Mod 001: X = active
X = Abbreviation of the module, e.g. DB1 for roof
brush 1
You can now change the condition of a module, i.e.
activate or deactivate a module. A module which is
deactivated will not be actuated during a wash cycle.
Use this function to switch off a defect module.
You can then operate the wash system with re-
duced functionality.
Modules which are not in their home position
may cause damages to vehicles or to the wash
system.
Make sure that all modules are in their home po-
sition before you deactivate a module.
The wash system cannot be started if a module is
not in its home position.
NOTICE
CAUTION