Operating instructions

SoftCare Evo - Type SE10 9-50
Menu 031
Lift control roof nozzle
Chapter 9 - Operating units
)
Press the button <<¨>> to display the condi-
tion of the roof nozzle.
⇒ The display shows:
Lift control roof nozzle: on
You can now change the condition of the roof nozzle,
i.e. switch roof nozzle on or off.
Use this menu to switch off the lift control after a
malfunction of the roof nozzle. You can then op-
erate the wash system with reduced functional-
ity. The roof nozzle remains in the upper home
position. The blower of the roof nozzle remains
active.
)
Press the button <<OK>> to change the con-
dition of the module, e.g. from active to inac-
tive.
⇒ The display shows:
Lift control roof nozzle: off
)
Press the button <<Cancel>> to accept the
change.
⇒ The display shows:
031 Lift control roof nozzle
NOTICE