Operating instructions

SoftCare Evo - Type SE10 9-58
Menu 0361
Program selection at
operating terminal
Chapter 9 - Operating units
)
Press the button <<¨>>.
⇒ The display shows:
Program selection at operating terminal: on
This function is only useful if the operating unit is
equipped with a card reader or a code system. With
“Program selection at operating terminal: on“ wash
programs can only be started from the card reader or
by entering a code at the operating terminal.
Program selection cannot be changed with
password 00001.
)
Press the button <<OK>> to change the con-
dition, e.g. from on to off.
⇒ The display shows for example:
Program selection at operating terminal: off
)
Press the button <<Cancel>> to return to the
start menu. The changes will be accepted.
⇒ The display shows:
0361 Program selection at operating terminal
NOTICE