Operating instructions

SoftCare Evo - Type SE10 9-97
1
2
1 = Cleaning card
2 = Microfibre cloth
Chapter 9 - Operating units
9.7.8. Cleaning the card reader
By using soiled wash cards the plain rollers of the
card reader may be soiled. You can recognize a soil-
ing when the wash cards are not smoothly drawn in.
In this case you have to clean the plain rollers.
Use therefore the WashTec cleaning set consisting
off a cleaning card and a cleaning liquid.
For cleaning proceed with the steps described below:
)
Apply a few drops of the cleaning liquid to the
microfibre cloth (2).
)
Insert the cleaning card into the card slot of
the card reader.
⇒ The card reader attempts to read the card.
Because it is not a wash card the card is re-
jected. The display of the operating terminal
displays a message that the card is not read-
able.
)
Repeat the procedure 3-4 times.
)
Remove the cleaning card afterwards.