Operating instructions

SoftCare Evo - Type SE10 3-23
Standard spray system
Chapter 3 - Structure and function
Pre-rinsing (1a)
Removes coarse dirt. Depending on the configura-
tion with process water or fresh water.
Post-rinsing (1a + 1b)
Rinses the washed vehicle with fresh water.
Water pressure for post rinsing is adjustable at
separate ball valve.
Do not reduce the flowing pressure at the fresh
water inlet because this will also change the mix-
ing ratio of the foam system.
Brush wetting (2)
1. wash stage: sprinkles water and shampoo onto
the brushes.
2. wash stage: sprinkles only water onto the brushes.
Depending on the configuration with process water
or fresh water.
For systems with fresh and process water supply:
The winter water control may be used to select either
fresh or process water during the 2. wash stage (see
chapter 9.6, menu 06).
Why fresh water?
During winter time a lot of salt ends up in the system
and therewith also in the process water. Thereby
stains appear on the vehicle during drying. By addi-
tional usage of fresh water a stainless drying is
achieved.
Don’t forget: Switch back to process water after
winter time. Otherwise increased fresh water
consumption.
NOTICE
NOTICE