Operating instructions

SoftCare Evo - Type SE10 4-1
Cleaning work
Chapter 4 – Commissioning/dismantling/ conversion/
transport/assembly
4. Commissioning/assembly/dis-
mantling/conversion/disposal
4.1. Commissioning
This chapter describes all the stages which must be
worked through daily in order to put the roll-over car
wash system into operation correctly.
)
Clean the floor of the building. Take particular
care over the area around the floor rails.
)
Clean the transmitters and receivers of all the
light barriers with a clean cloth without addi-
tional cleaning agents.
Cleaners that contain hydrochloric acid, formic
acid, hydrofluoric acid, or alkaline cleaners, can
cause damage to the lenses.
Fig. 4-1: Position of the light barriers
)
Remove all obstacles, such as cleaning
equipment, buckets, hoses, etc. from the wash
bay.
CAUTION