Operating instructions

Dear Customer,
thank you for opting for WashTec. You have selected a product that will be in reli-
able operation in your car wash business for a long time. And there is a lot you can
do to ensure this. Please read this operating manual carefully and observe the
maintenance and care instructions listed in it. This significantly increases the ser-
vice life of your system.
In case of a problem, please check the following points first:
• Observe the error messages on the display of the operating unit!
• Could the problem be due to a power failure or a failure in the air or water
supply?
• Are missing respectively wrong equipment or non-dearated feed pumps the
cause?
• Is the emergency-off button/switch activated?
• Are the light barriers dirty?
Our customer service will remedy defects in/on the system in the scope of our
warranty. These relate to the service that is part of the delivery scope of our ma-
chines and do not include: equipment, wear and tear parts, damages caused by
improper operation, etc. The exclusions from warranty are listed on the next two
pages.
If components were connected during the installation of your new system (for ex-
ample existing aggregates like pumps etc. or equipment by other manufacturers
like automatic doors, water recycling plants, etc.) that we did not deliver, possible
operational breakdowns caused by these components are also excluded from our
warranty. This naturally also applies to breakdowns directly related to this third-
party equipment.
In order to prevent damages to vehicles passing through the car wash facility,
you must observe all notices in the operating manual. A sequencer controls the
automatic doors (in winter operation together with light barrier signals) by means
of switching impulses for opening and closing the car wash facility. For protection
against damage, the doors must be equipped with suitable safety installations.
Please contact your door supplier.
We wish you lots of success with your business.
WashTec Cleaning Technology GmbH