Operating instructions
Exclusions from warranty
Valid for machine types: GW WT CW WR SW
z
Delivery and installation of any type of illuminates and lights
X X X
X
z
Delivery and installation of sign boards or –foils.
X X X X X
z
Program modifications on behalf of the ordering party
X X X X X
z
Delivery of operating facilities/ program cards
X X X X X
z
Provision of cleaning agents and operating facilities
X X X X X
z
Remedy of damages which are related to the impact of frost
X X X X X
z
Exchange of defect pre-fusing in the supply line (customer
supplied main distributor)
X X X X X
z
Replacement of system parts which got lost by theft
X X X X X
z
Replacement and disposal of filter media such as quartz
sand, filter pads, etc.
X
z
Disposal of silt traps and sedimentation tanks
X X X X X
z
Filling and spindling of the under-floor heater
X
z
Remedy of damages or malfunctions which have been
caused by improper operation of the system through the
operator.
Examples:
X X X X X
1.
Usage of non-original WashTec spare parts or non-original
brush material by the ordering party
X X X X X
2. Manual actuation of contactors
X X X X X
3.
Damage of the system or accessories by the operator or
third party
X X X X X
4.
Cleaning of the system with unsuitable cleaning agents, e.g.
hydrofluoric acid.
X X X X X
5.
Unprofessional cleaning of the system with high-pressure
units
X X X X X
6.
Soiling of brushes or dosing facilities due to mixing up or
using the wrong cleaning agents such as shampoo, wax,
etc.
X X X X X
7.
Wrong setting of the dosing facilities by the ordering party
and resultand malfunctions
X X X X X
8.
Empty cleaning agent containers or dosing pumps which
have not been bleeded.
X X X X X
9. Violent removal of jammed program cards
X X X X X
10. Dirty light barriers and spray nozzles
X X X X X
11.
Malfunctions caused by clogging of the fresh water line,
process water line and waste water line and by cleaning
these lines
X X X X X
12.
Explicit non-observance of the maintenance and care work
which has to be carried out by the operator and which is
outlined in the operating instructions / operating journal
X X X X X