Operating instructions

SoftCare Evo - Type SE10 7-10
Chapter 7 - Maintenance and care
7.3. Maintenance
Your roll-over car wash system has been developed
and manufactured so that a minimum of mainte-
nance and care work is necessary.
In order to ensure that constantly good washing re-
sults and the maximum system operating time are
always achieved, you should carry out the following
work on a regular basis.
You can find a check-list for maintenance and care
work in the appendix. Please use this list as a re-
minder when carrying out the necessary work.
7.3.1. Maintenance on demand
Proceed with the following steps if the spray nozzles
are clogged (insufficient spray pattern):
)
Remove and clean clogged or soiled nozzles.
Exchange defect nozzles.
Inform WashTec Service if the spray pattern is
not sufficient after cleaning or exchanging the
nozzles.
NOTICE