QUICK START GUIDE Wasp WLS 9500 w w w. w a s p b a rc o d e .
Quick Start Guide LED Scan Window Beeper Trigger CORD ATTACHMENT Model Number and Serial Number appear here.
Quick Start Guide SCANNER PROGRAMMING BARCODES Reset Defaults Set All Defaults Set Postamble Note: If you do not need a Postamble, scan 1 Erase All Rules.
Quick Start Guide HOST INTERFACES Note: Cable may vary depending on configuration. Must be PS2 Port Must be powered USB port. Keyboard Wedge USB SCANNER PROGRAMMING BARCODES Start Here if you have a USB scanner: *HID Keyboard Emulation USB OPOS Handheld Start Here if you have a keyboard wedge scanner.
Quick Start Guide TROUBLESHOOTING Problem Possible Cause Resolution Problem Possible Cause Resolution Scanner not working No power Incorrect Interface/power to scanner interface cables are cable loose used Scanner not decoding barcode Scanner not Barcode Distance programmed unreadable between for barcode scanner type and barcode incorrect Check system power; ensure power supply, if required, is connected. Program the scanner to read that type of barcode.
Quick Start Guide SYMBOLOGIES This section provides the following information: Enable/Disable Barcodes - These barcodes allow you to enable or disable symbologies. Check Digit Barcodes - The check digit is the last character of the symbol used to verify the integrity of the data. It is always verified to guarantee the integrity of the data (applies to UPC-A/UPC-E and Code 39 only). Preamble Barcodes - Preamble characters are part of the UPC symbol consisting of Country Code and System character.
Quick Start Guide Enable/Disable UPC-E1 Enable UPC-E1 *Disable UPC-E1 Enable/Disable EAN-13/EAN-8 *Enable EAN-13 Disable EAN-13 *Enable EAN-8 Disable EAN-8 6
Quick Start Guide Enable/Disable Bookland EAN Enable Bookland EAN *Disable Bookland EAN Transmit UPC-A Check Digit *Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit 7
Quick Start Guide Transmit UPC-E1 Check Digit.
Quick Start Guide UPC-E Preamble No Preamble () *System Character ( ) System Character & Country Code (< COUNTRY CODE> ) UPC-E1 Preamble No Preamble () *System Character ( ) System Character & Country Code (< COUNTRY CODE> ) 9
Quick Start Guide Convert UPC-E to UPC-A Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). When disabled, UPC-E decoded data is transmitted as UPC-E data, without conversion.
Quick Start Guide EAN-8/JAN-8 Extend When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. When disabled, EAN-8 symbols are transmitted as is. Enable EAN/JAN Zero Extend *Disable EAN/JAN Zero Extend Code 128 Enable/Disable Code 128.
Quick Start Guide Enable/Disable ISBT 128 ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan the appropriate bar code below to enable or disable ISBT 128. If necessary, the host must perform concatenation of the ISBT data. *Enable ISBT 128 Disable ISBT 128 Code 39 Enable/Disable Code 39 *Enable Code 39 Disable Code 39 Enable/Disable Trioptic Code 39 Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges.
Quick Start Guide Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. Transmit Code 39 Check Digit Transmit Code 39 Check Digit (Enable) *Do Not Transmit Code 39 Check Digit (Disable) Code 39 Check Digit Verification must be enabled for this parameter to function. Convert Code 39 to Code 32 Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32.
Quick Start Guide Code 32 Prefix Enable Code 32 Prefix *Disable Code 32 Prefix Code 93 Enable/Disable Code 93 Enable Code 93 *Disable Code 93 14
Quick Start Guide Code 11 Enable/Disable Code 11 . Enable Code 11 *Disable Code 11 Interleaved 2 of 5 (ITF) Enable/Disable Interleaved 2 of 5 *Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to be interpreted as a complete scan, yielding less data than is encoded in the bar code.
Quick Start Guide Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Enable Discrete 2 of 5 *Disable Discrete 2 of 5 Codabar (NW - 7) Enable/Disable Codabar Enable Codabar *Disable Codabar 16
Quick Start Guide RSS (Reduced Space Symbology) The variants of RSS are RSS 14, RSS Expanded and RSS Limited. RSS 14 and RSS Expanded include stacked versions. Scan the appropriate bar code below to enable or disable each variant of RSS.
Quick Start Guide SAMPLE BARCODES Code 39 123ABC UPC/EAN UPC-A, 100% 0 12345 67890 5 EAN-13, 100% 3 456789 012340 Code 128 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 18
Quick Start Guide Interleaved 2 of 5 1234567890123 RSS 10293847560192837465019283746029478450366523 (RSS Expanded Stacked) 1234890hjio9900mnb (RSS Expanded) 08672345650916 (RSS Limited) 19
Quick Start Guide RSS-14 55432198673467 (RSS-14 Truncated) 90876523412674 (RSS-14 Stacked) 78123465709811 (RSS-14 Stacked Omni-Directional) 20
WASP DURALINE INDUSTRIAL SCANNER PATENTS This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No.