WLS8600 Quick Reference Guide
Wasp Barcode Technologies 1400 10th Street Plano, Texas USA 75074 Tel. 214-547-4100 Tel. 214-547-4101 ©2005-2013 Wasp Barcode Technologies, Inc. (an unpublished work provided under license). Patents This product may be covered by one or more of the following patents: Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK 0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S. US Pat.
Table of Contents Updates and Language Availability ..............................................................................1 Using the WLS8600 .............................................................................................................2 Aiming System ...........................................................................................................2 Setting Up the Reader ........................................................................................................
NOTES
Updates and Language Availability UK/US The latest drivers and documentation updates for this product are available. Contact WASP Technical Support. I Gli ultimi driver e aggiornamenti della documentazione per questo prodotto sono disponibili. Contattare WASP supporto tecnico. F Les derniers pilotes et mises à jour de documentation pour ce produit sont disponibles. Contactez le support technique WASP. D Die neuesten Treiber und Dokumentation Updates für dieses Produkt verfügbar sind.
WLS8600 Using the WLS8600 WLS8600 readers automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the scan line emitted from the reading window. This line must cross the entire code. The best reading angles are indicated in the figure below.: Aiming System The WLS8600 provides an aiming system. If enabled, a partial trigger press produces a red spot, which should be aimed over the code center to get the best reading performance, see figure (1) above.
Setting Up the Reader Setting Up the Reader Follow the steps below to connect and get your reader up and communicating with its host. 1. 2. Connect the Cable to the reader and the Host. Configure the Interface (see page 5). 3. Program the Reader starting on page 10 (optional, as needed). Connecting the Cable A. Rubber gasket B. Plastic boot C. Cable spacer D. Cover E. Strain relief 1. 2. Slip the cover over the cable. Push the plastic boot into the rubber gasket.
Setting Up the Reader Connecting to the Host Interface USB WEDGE RS-232 PEN 4 WLS8600
Selecting the Interface Type Selecting the Interface Type Upon completing the physical connection between the reader and its host, proceed directly to Interface Selection below for information and programming for the interface type the reader is connected to (for example: RS-232, Keyboard Wedge, USB, etc.) and scan the appropriate barcode to select your system’s correct interface type. Interface Selection Select one of the interface codes according to your application.
Selecting the Interface Type Pen Emulation Interface Selection PEN Ì$+CP6$-BÎ RS-232 Interface Selection RS-232 Standard Ì$+CP0$-$Î Nixdorf Mode A Ì$+CM2EC0$->Î Fujitsu Ì$+CM1$-ÈÎ ICL Mode Ì$+CM0$-ÃÎ Wedge Interface Selection Wedge IBM AT or PS/2 PCs Ì$+CP500$-aÎ PC Notebook Ì$+CP505$-ÈÎ PC Notebook - ALT mode Ì$+CP508$-2Î IBM AT - ALT mode Ì$+CP507$-+Î The Interface for IBM XT and IBM Terminals 3151, 347X and 348X can be selected from the WLS8600 Reference Manual available online at www.
Selecting the Interface Type Keyboard Nationality USB-KBD and Wedge users should select one of the following wedge keyboard nationality codes according to the keyboard. Belge Ì$+FJ7$-8Î Deutsch Ì$+FJ3$-$Î English Ì$+FJ4$-)Î Español Ì$+FJ6$-3Î Français Ì$+FJ2$-ÊÎ Italiano Ì$+FJ1$-ÅÎ Svenskt Ì$+FJ5$-.
Selecting the Interface Type Keyboard Nationality (continued) The following Keyboard Nationality selections are only valid for IBM AT compatible PCs: Japanese Ì$+FJ8$-=Î Russian (Latin) Ì$+FJ9$-BÎ Russian (Cyrillic) Ì$+FJA$-jÎ Hungarian Ì$+FJB$-oÎ Slovenian, Croatian, Serbian (Latin) Ì$+FJC$-tÎ Romanian Ì$+FJD$-yÎ Czech Republic Ì$+FJE$-~Î 8 WLS8600
PowerScan™ M8300 Default Configuration PowerScan™ M8300 Default Configuration DATA FORMAT code identifier disabled, field adjustment disabled, code length not transmitted, character replacement disabled CODE SELECTION Enabled codes • • • • EAN 8/EAN 13 / UPC A/UPC E without ADD ON check digit transmitted, no conversions Interleaved 2/5 check digit control and transmission, variable length code; 4-99 characters Standard Code 39 no check digit control, variable length code; 1-99 characters Code 128 variabl
Programming Programming The reader is factory-configured with a set of standard default features. After scanning the interface barcode from the Interfaces section, select other options and customize your reader through use of the programming barcodes available in the WLS8600 Reference Manual. Check the corresponding features section for your interface, and also the Data Editing and Symbologies chapters of the PRG.
Technical Features Technical Features WLS8600 Electrical Features Power Supply Max. Consumption: @ 4V @5V @30V Sleep mode Scan Rat Reading Indicators WLS8600 4 to 30 VDC 0.076 mm (3 mils) 420 mA 310 mA 62 mA 4 mA 35 ± 5 scans/sec Good Read LED (green) Good Read Spot (green), Beeper Optical Features Reading Field (Typical performance at 20ºC / 68ºF on high quality barcodes) Max. Resolution PCS 97.8 cm (38.5 in) @ 40 mils 0.076 mm (3 mils) 15% Laser Features Power (max) Scan Angle Laser Safety Class 0.
Default Values Default Values USB-KBD DEFAULT SETTINGS USA keyboard, FIFO enabled, inter-character and inter-code delays disabled, USB keyboard speed normal. DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = ENTER, character replacement disabled. RS-232 Standard DEFAULT SETTINGS 9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx timeout 5 sec.
Compliance Compliance Laser Safety Compliance The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at the date of manufacture. The laser light is visible to the human eye and is emitted from the output window (1). Laser warning and classification label (2). WARNING Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light.
Compliance LED CLASS Class 1 LED product. CE Compliance WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. FCC Compliance Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules.
Compliance Wasp Barcode Technologies Limited Factory Warranty Warranty Coverage Wasp warrants to Customer that Wasp's products will be free from defects in materials and workmanship for a period of one year from product shipment. Wasp Barcode Technologies (“Wasp”) hardware products are warranted against defects in material and workmanship under normal and proper use.
Service and Support No Assignment Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Wasp.
Service and Support NOTES Quick Reference Guide 17
Service and Support NOTES 18 WLS8600
DECLARATION OF CONFORMITY 13 Wasp Barcode Technologies 1400 10th St Plano, Texas La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Wasp Barcode Technologies.
www.waspbarcode.
