WLS9600 1D Laser Scanner USB Quick Reference Guide
Wasp Barcode Technologies 1400 10th Street Plano, Texas USA 75074 Tel. 214-547-4100 Tel. 214-547-4101 Copyright Notice: ©2000-2013 Wasp Barcode Technologies, Inc. (an unpublished work provided under license). Patents This product may be covered by one or more of the following patents: Design Patents: CN ZL200830142386.5; CN ZL200930006852.
Table of Contents END USER LICENSE AGREEMENT .....................................................1 Software Product Policy...................................................................... 4 WLS9600 ...................................................................................................5 Connect/Disconnect Cable................................................................ 5 Connect Host Interface........................................................................
NOTES
Wasp Barcode Technologies WLS9600 PRODUCT SERIES END USER LICENSE AGREEMENT Notice to End User: The Wasp Barcode Technologies Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Wasp Product, you will be deemed to have accepted the terms and conditions of this Agreement.
3. Transfers, Support 3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated Wasp Product will be a material breach of this Agreement. However, Wasp may elect not to terminate this Agreement or the granted licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use.
this Agreement. 6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE Wasp PRODUCT IS PROVIDED "AS IS" AND Wasp MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 7. Infringement 7.
Software Product Policy 10. Termination 10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement. 10.
WLS9600 1 Connect/Disconnect Cable 2 Connect Host Interface Keyboard Wedge Interface Quick Reference Guide 5
Aim and Scan RS-232 Interface USB Interface 3 Aim and Scan 012345 6 012345 WLS9600
Parts of the Reader The area shown in green below illustrates the area of typical maximum performance for the scanner.
Scanning Modes Scanning Modes The reader can operate in one of several scanning modes: Trigger Single — When the trigger is pulled, scanning is activated until one of the following occurs: - a programmable duration1 has elapsed - a label has been read - the trigger is released This mode is associated with typical handheld reader operation: when the trigger is pulled, scanning starts and the product scans until the trigger is released, or a label is read, or the maximum programmable duration1 has elapsed.
Scanning Modes Scan Mode = Trigger Single Scan Mode = Trigger Hold Multiple Scan Mode = Trigger Pulse Multiple Scan Mode = Flashing Scan Mode = Always On Scan Mode = Stand Mode Quick Reference Guide 9
Cleaning Cleaning Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to ensure best performance during scanning. Use a soft, dry cloth to clean the product. If the product is very soiled, clean it with a soft cloth moistened with a diluted non-aggressive cleaning solution or diluted ethyl alcohol. Do not use abrasive or aggressive cleansing agents or abrasive pads to clean scan windows or plastics.
Technical Features Technical Features Item Description Physical Characteristics Color Black/Yellow Dimensions Height 7.1” / 181mm Length 3.9” / 100mm Width 2.8” / 71mm Weight (without cable) Approximately 6.0 ounces/169 g Electrical Characteristics Voltage & Current Input current at 5V±5% = 260 mA (max) 2.
Technical Features User Environment Operative Temperature 32° to 122° F (0° to 50° C) Storage Temperature -4° to 158° F (-20° to 70° C) Humidity Operating: 5% to 90% relative humidity, non condensing Drop specifications 18 drops from 1.8 meters (5.9 feet) to concrete Ambient Light immunity Up to 100,000 Lux Contaminants IP52 ESD Level 16 KV Regulatory Electrical Safety IEC 60950-1 , CAN/CSA-C22.2 No.
Troubleshooting Troubleshooting Problem Possible Cause Nothing happens when the scan button is No power to the reader. pulled. Possible Solutions Check system power. Ensure power supply is connected. Interface or power cables Ensure all cable connections are loose. are secure. Laser comes on, but barcode does not decode. Ensure reader is programmed to read the type Reader not programmed of barcode scanned. Refer to for correct barcode type. the Product Reference Guide (PRG) for more information.
LED and Beeper Indications LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the power-up beep can be disabled using programming barcode labels.
Programming Barcodes Programming Barcodes For your convenience, this guide includes the programming barcodes required to configure the reader for use with different interface (terminal/host) types. See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You can download the latest version of the PRG and any other available publications for the reader from the website listed on the back cover of this manual.
Programming Barcodes RS-232 Interface To use an RS-232 interface, scan the barcode for the desired RS-232 host type.
Programming Barcodes USB Interface The reader attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the reader auto-detects the USB cable and defaults to the USB keyboard interface. Select USB Keyboard (with standard key encoding) Select USB-COM-STD1 (simulates RS-232 standard interface) Select USB Alternate Keyboard (with alternate key encoding) Select USB OEM Select USB-KBD-APPLE (for Apple computers) 1.
Programming Barcodes Keyboard Wedge Interface To use a Keyboard Wedge interface, scan the barcode for the desired keyboard type.
Programming Barcodes Keyboard Wedge Interface (continued) Select KBD-XT (PC/XT w/Standard Key Encoding) Select KBD-IBM-3153 (for IBM Terminal 3153) Select KBD-IBM-M (for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard) Select KBD-IBM-MB (for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard) Select KBD-DIG-VT (for DIGITAL Terminals VT2xx, VT3xx, VT4xx) Quick Reference Guide 19
Ergonomic Recommendations Ergonomic Recommendations CAUTION To avoid or minimize the potential risk of ergonomic injury, follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
Regulatory Information Laser Safety Compliance The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at the date of manufacture. The laser light is visible to the human eye and is emitted from the output window. Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazarouds visible laser light. CAUTION The laser scanner utilizes a low-power laser diode.
Regulatory Information Radio Frequency Interference Requirements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Reader Labeling Reader Labeling Sample labels are shown here to illustrate their location only. Please view the labels on your product for actual details, as they may vary from those depicted. See product manual and package for patent listin g. LISTED RY ACCESSOU I.T.E., .3KR N263 Scanner Regulatory Label Aiming System The Wasp aiming system meets the Class 2 requirements for laser safety. The laser information is located on the window of the Scanner as shown below.
Reader Labeling Wasp Barcode Technologies Limited Factory Warranty Warranty Coverage Wasp warrants to Customer that Wasp's products will be free from defects in materials and workmanship for a period of one year from product shipment. Wasp Barcode Technologies (“Wasp”) hardware products are warranted against defects in material and workmanship under normal and proper use.
Reader Labeling (iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus; (iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual; (v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and
Reader Labeling NOTES 26 WLS9600
DECLARATION OF CONFORMITY 13 Wasp Barcode Technologies 1400 10th St Plano, Texas La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Wasp Barcode Technologies.
www.waspbarcode.com Wasp Barcode Technologies 1400 10th Street Plano, Texas USA 75074 820055890 (Rev.
