User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-101.png)
Using the Wireless Network Wizard
User Guide 73
Using the Wireless Network Wizard
The Wireless Network Wizard is a tool that you use to automatically
configure your wireless network.
Setting up the Wireless Access Point
WatchGuard is concerned about the security of your network so the
wireless feature of the Firebox X Edge Wireless is disabed until you
are ready to use it. Activate the wireless feature when you configure
the security of the wireless connections.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge Wireless.
The default IP address is: https://192.168.111.1
1 From the navigation bar, select
Network > Wireless (802.11g).
The Wireless Network Configuration page appears.
2 From the Encryption drop-down list, select Disabled.
3 From the Authentication drop-down list, select Open System.
4 Record the number that appears in the SSID text box of the
Basic Settings for later use.
The SSID (Service Set Identifier) is the identification number of the
wireless device. The SSID is used to create the wireless connection. The
default SSID is the 5-digit serial number for your Firebox X Edge
Wireless.
5 Click Submit.
Configuring the Wireless Card on Your Computer
These instructions are for the Windows XP operating system. To see
installation instructions for other operating systems, go to:
http://www.watchguard.com/support/sohoresources/
1 Select Start > Settings > Control Panel > Network
Connections.
The Network Connections dialog box appears.
2 Double-click Wireless Network Connection.
The Wireless Network Connection dialog box appears.