User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-104.png)
Setting up the Firebox X Edge Wireless
76 WatchGuard Firebox X Edge
To change the channel:
• Select a value from the Channel drop-down list.
There are four options to choose from in order to set the proper
operating region: North America, Europe, France, and Japan. It is
very important that you select the proper region because this setting
applies to the certification requirements of your region. To config-
ure the operating region select an option from the Operating Region
drop-down list.
Configuring security
Select the Authentication mode you want to use for your wireless
network connection.
The options are Open System, Shared Key, and Both.
Open System
This option does not support shared keys. If you disable
encryption, this is the only option.
Shared Key
This option supports shared keys. If you enabled WPA, this
option is enabled.
WPA-PSK
This option activates preshared-keys.
1 From the Encryption drop-down list, select the level of
encryption for your wireless connections.
The options are Disabled, 64/128 bit WEP, and WPA-PSK.
Disabled
The default setting is Disabled. Use this option for the initial
connection. Your wireless connection is not encrypted when
Disabled is selected.
64/128 bit WEP or WPA-PSK
After you complete the initial connection between your wireless
computer and Firebox X Edge Wireless, you can change the
Encryption setting to add WPA-PSK.
2 If you have selected WPA encryption, type a hexadecimal
number in the Key text boxes.
You can enter up to four keys that the wireless network will use for
connections. If you have selected 64 bit WEP, the key can be up to 10
characters. If you have selected 128 bit WEP, the key can be up to 26
characters.