User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-117.png)
Configuring Firewall Options
User Guide 89
To stop using the current MAC address:
1 Select the Enable override MAC address for the External
Network checkbox, or select the Enable override MAC address
for the Failover Network checkbox.
You can select the checkboxes together.
2 In the External network override AC address or Failover
network override AC address text box, type the new MAC
address for the Firebox X Edge external or failover network.
3 Click Submit.
NOTE
If the MAC address for the external network field is cleared and
the Firebox X Edge is restarted, the Firebox X Edge uses the
standard MAC address for the external network.
To stop MAC address problems, the Firebox X Edge finds the current
MAC address at regular intervals. If the Edge finds a device using the
same MAC address, the Firebox changes to the standard MAC
address for the external network. Then the Edge restarts.
Type the IP address of the trusted network in your browser window
to connect to the System Status page of the Firebox X Edge.