User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Logging to a Syslog Host
User Guide 93
2 From the navigation bar, select Logging > WSEP Logging.
The WatchGuard Security Event Processor Logging page appears.
3 The Enable WatchGuard Security Event Processor Logging checkbox
should contain a checkmark. If it does not, select it.
4 In the Log Host IP Address field, type the IP address of the WSEP server
that is your log host.
5 Type a passphrase in the Log Encryption Key field and confirm the
passphrase in the Confirm Key field.
6 In the Device Name field, type a name for the Firebox X Edge.
This identifier lets the WSEP log host distinguish between different devices
logging to it. If this field is empty, the Firebox X Edge is identified to the WSEP log
host by the IP address of the Firebox’s external interface.
7 Click Submit.
N
OTE
N
OTE
Use the same log encryption key used by the WSEP application.
Logging to a Syslog Host
Syslog is a logging interface, developed for UNIX also used by a number of
computer systems. This option sends the Firebox® X Edge log messages to a
Syslog host. If you already maintain a Syslog host, set the Edge to send log
messages to that host.