User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
User Guide 121
CHAPTER 10 Configuring the
MUVPN Client
The MUVPN client is a software application that is installed on a
remote computer. The client makes a secure connection from the
remote computer to your protected network on an unsecured network.
The MUVPN client uses Internet Protocol Security (IPSec) to secure the
connection.
This example shows how the MUVPN client is used.
• The MUVPN client is installed on a remote computer.
• The user connects to the Internet with the remote computer. The
user starts the MUVPN client.
• The MUVPN client creates an encrypted tunnel to the Firebox X
Edge.
• The Firebox X Edge connects the remote computer to the trusted
network. The employee has secure remote access to the internal
network.
The MUVPN client includes ZoneAlarm
®
, a software firewall.
ZoneAlarm gives remote computers more security. The use of
ZoneAlarm is optional.
This chapter shows how to install and configure the MUVPN client on
a remote computer. This chapter also includes information about the
features of the ZoneAlarm personal firewall.