User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Configuring the MUVPN Client
124 WatchGuard Firebox X Edge
2 Double-click the Add/Remove Programs icon.
The Add/Remove Properties window appears.
3 Click the Windows Setup tab.
The Windows Setup dialog box appears. Windows looks for installed
components.
4 Select the Communications checkbox and then click OK.
The Copying Files dialog box appears. The operating system copies the
necessary files.
5 The Dial-Up Networking Setup window appears. Click OK to
restart the computer.
The computer reboots.
The Dial-up Networking 1.4 version patch must be installed if you
use Windows 98. Get this update from the Microsoft Web site.
Configuring the WINS and DNS settings
The remote computer must be able to contact the WINS and DNS
servers. These servers are on the trusted network of the Firebox X
Edge.
From the Windows desktop:
1 Select Start > Settings > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Select TCP/IP > Dial-Up Adapter and then click Properties.
The TCP/IP Properties Information window appears.
4 Click OK.
5 Click the DNS Configuration tab and select the Enable DNS
checkbox.
6 Type the IP address of the DNS server in the DNS Server Search
Order text field. Click Add.
If you have more than one remote DNS server, repeat steps 5 and 6 for
each server.
NOTE
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
7 Click the WINS Configuration tab and select the Enable WINS
Resolution checkbox.