User's Manual

Preparing Remote Computers to Use the MUVPN Client
User Guide 125
8 Type the IP address of the WINS server in the WINS Server
Search Order text field and click Add.
If you have more than one remote WINS server, repeat steps 7 and 8 for
each server.
9 Click OK to close the TCP/IP Properties window. Click OK to
close the Network window.
The System Settings Change dialog box appears.
10 Click Yes to restart the computer.
The computer restarts.
Windows NT setup
Use this section to install and configure the network components
for the Windows NT operating system. These components must be
installed before you can use the MUVPN client on a Windows NT
computer.
Installing Remote Access Services on Windows NT
You must install Remote Access Services (RAS) before you install the
Mobile User VPN Adapter. To install RAS, use this procedure.
1 Follow the Windows desktop, select Start > Settings > Control
Panel.
2 Double-click the Network icon.
The Network window appears.
3 Click the Services tab and click Add.
4 Select Remote Access Services and click OK.
5 Type the path to the Windows NT installation files, or put your
system installation CD in the computer and click OK.
The Remote Access Setup window appears.
6 Click Yes to add a RAS device, for example, a modem, and then
click Add.
7 Complete the Install New Modem wizard.
NOTE
If there is no modem installed, select the Don't detect my
modem; I will select it from a list
checkbox. Select the
standard 28800 modem. If a modem is not available, you can
select a serial cable between two computers.
8 Select the modem from the Add RAS Device window.
9 Click OK, click Continue and click Close.