User's Manual

Configuring the MUVPN Client
126 WatchGuard Firebox X Edge
10 Restart the computer.
Configuring the WINS and DNS settings
The remote computer must be able to contact the WINS servers and
the DNS servers. These servers are located on the trusted network
that is protected by the Firebox X Edge.
From the Windows desktop:
1 Select Start > Settings > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Click the Protocols tab and select the TCP/IP protocol.
4 Click Properties.
The Microsoft TCP/IP Properties window appears.
5 Click the DNS tab and click Add.
6 Type the IP address of your DNS server.
To add more DNS servers, repeat steps 5 and 6 for each server.
NOTE
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
7 Click the WINS Address tab, type the IP address of your WINS
server in the applicable field, and then click OK.
To add more WINS servers, repeat this step.
8 Click Close to close the Network window.
The Network Settings Change dialog box appears.
9 Click Yes to restart the computer.
The computer restarts.
Windows 2000 setup
Use this section to install and configure the network components
for the Windows 2000 operating system. These components must be
installed before you can use the MUVPN client on a Windows 2000
computer.
From the Windows desktop:
1 Select Start > Settings > Network and Dial-up Connections.
2 Select the dial-up connection you use to get Internet access.
The connection window appears.
3 Click Properties and click the Networking tab.