User's Manual

Configuring the MUVPN Client
130 WatchGuard Firebox X Edge
Configuring the WINS and DNS settings
The remote computer must be able to contact the WINS and DNS
servers. These servers are on the trusted network of the Firebox X
Edge.
From the connection window, Networking tab:
1 Select the Internet Protocol (TCP/IP) component.
2 Click Properties.
The Internet Protocol (TCP/IP) Properties window appears.
3 Click Advanced.
The Advanced TCP/IP Settings window appears.
4 Click the DNS tab and then, from the section labeled DNS
server addresses, in order of use, click Add.
The TCP/IP DNS Server window appears.
5 Type the IP address of the DNS server in the applicable field.
Click Add.
To addmore DNS servers, repeat steps 4 and 5.
NOTE
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
6 Select the Append these DNS suffixes (in order) checkbox.
Click Add.
The TCP/IP Domain Suffix window appears.
7 Enter the domain suffix in the applicable field.
To add more DNS suffixes, repeat step 6.
8 Click the WINS tab and in the section labeled WINS addresses,
in order of use, click Add.
The TCP/IP WINS Server window appears.
9 Type the IP address of the WINS server in the applicable field.
Click Add.
To add more WINS servers, repeat steps 8 and 9.
10 Click OK to close the Advanced TCP/IP Settings window. Click
OK to close the Internet Protocol (TCP/IP) Properties window,
and then click OK.
11 Click Cancel to close the connection window.