User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Configuring the MUVPN Client
132 WatchGuard Firebox X Edge
13 The MUVPN client is installed. Make sure the option Yes, I want
to restart my computer now is selected. Click Finish.
The computer restarts.
NOTE
The ZoneAlarm personal firewall may prevent you from
conencting to the network after the computer restarts. If this
occurs, log on to the computer locally the first time after
installation. For more information, see “The ZoneAlarm Personal
Firewall” on page 140.
Importing the .wgx file
The Firebox X Edge has encrypted MUVPN client configuration
(.wgx) files available for download.
1 To connect to the System Status page, type the IP address of
the trusted network in the browser.
The default IP address is: https://192.168.111.1
2 From the navigation bar, select Firebox Users and scroll to the
bottom of the page.
3 Under MUVPN Client Configuration Files, select the .wgx file
you want to download and follow the instructions on the
screen.
Uninstalling the MUVPN client
Use this procedure to uninstall the MUVPN client. WatchGuard rec-
ommends that you use the Windows Add/Remove Programs tool.