User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Configuring the MUVPN Client
136 WatchGuard Firebox X Edge
2 If the MUVPN client is not active, right-click the icon and select
Activate Security Policy.
For information about the MUVPN icon, see “The MUVPN client icon” on
page 136.
From the Windows desktop:
3 Select Start > Programs > Mobile User VPN > Connect.
The WatchGuard Mobile User Connect window appears.
4 Click Yes.
The MUVPN client icon
The MUVPN icon appears in the Windows desktop system tray. The
icon image provides information about the status of the connection.
Deactivated
The MUVPN Security Policy is not active. This icon can appear if
the Windows operating system did not start a required MUVPN
service. If this occurs, the remote computer must be restarted. If
the problem continues, reinstall the MUVPN client.
Activated
The MUVPN client can make a secure MUVPN tunnel
connection.
Activated and Transmitting Unsecured Data
The MUVPN client can make a secure MUVPN tunnel
connection. The red bar on the right of the icon tells you that
the client is sending data that is not secure.
Activated and Connected
The MUVPN client is connected with one or more secure MUVPN
tunnels, but it is not sending data.
Activated, Connected and Transmitting Unsecured Data