User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-166.png)
Configuring the MUVPN Client
138 WatchGuard Firebox X Edge
2 Set the Remember this answer the next time I use this
program check box and then click Yes.
This option lets the ZoneAlarm personal firewall allow Internet access for
this program each time you start a MUVPN connection.
Disconnecting the MUVPN client
From the Windows desktop system tray:
1 Right-click the MUVPN client icon and select Deactivate
Security Policy.
The MUVPN client icon with a red bar is displayed.
If the ZoneAlarm personal firewall is active, deactivate it now.
From the Windows desktop system tray:
1 Right-click the ZoneAlarm icon shown at right.
2 Select Shutdown ZoneAlarm.
The ZoneAlarm window appears.
3 Click Yes.
Monitoring the MUVPN Client Connection
The Log Viewer and the Connection Monitor are installed with the
MUVPN client. These tools let you monitor the MUVPN connection
and troubleshoot problems.
Using Log Viewer
Use Log Viewer to display the communications log. This log shows
the events that occurr when the MUVPN tunnel is started.
From the Windows desktop system tray:
1 Right-click the Mobile User VPN client icon.
2 Select Log Viewer.
The Log Viewer window appears.