User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
The ZoneAlarm Personal Firewall
User Guide 141
Shutting down ZoneAlarm
From the Windows desktop system tray:
1 Right-click the ZoneAlarm icon shown at right.
2 Select Shutdown ZoneAlarm.
The ZoneAlarm window appears.
3 Click Yes.
Uninstalling ZoneAlarm
From the Windows desktop:
1 Select Start > Programs > Zone Labs > Uninstall ZoneAlarm.
The Confirm Uninstall dialog box appears.
2 Click Yes.
The ZoneLabs TrueVector service dialog box appears.
3 Click Yes.
The Select Uninstall Method window appears.
4 Make sure Automatic is selected and then click Next.
5 Click Finish.
NOTE
The Remove Shared Component window can appear. During the
initial installation of ZoneAlarm, some files were installed that
could be shared by other programs on the system. Click
Yes to All
to completely remove all of these files.
6 The Install window appears and prompts you to restart the
computer. Click OK to restart.
MS Internet Explorer IEXPLORE.exe
Netscape 6.1 netscp6.exe
Opera Web browser Opera.exe
Standard Windows network applications lsass.exe
services.exe
svchost.exe
winlogon.exe