User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Configuring the MUVPN Client
144 WatchGuard Firebox X Edge
I am sometimes prompted for a password when I am
browsing the company network...
Due to a Windows networking limitation, remote user virtual private
networking products can allow access only to a single network
domain. If your company has multiple networks connected together,
you will only be able to browse your own domain. If you try to con-
nect to other domains, a password prompt will appear. Unfortu-
nately, even providing the correct information will not allow you to
access these additional networks.
It takes a
very
long time to shut down the computer
after using the MUVPN client...
If you access a mapped network drive during an MUVPN session, the
Windows operating system will wait for a signal from the network
before the shutdown is complete.
I lost the connection to my ISP, and now I can’t use
the company network...
If your Internet connection is interrupted, the connection to the
MUVPN tunnel may be lost. Follow the procedure to close the tun-
nel. Reconnect to the Internet. Restart the MUVPN client.