User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Managing the Firebox® X Edge
152 WatchGuard Firebox X Edge
5 You can also enter a WINS Server Address and DNS Server
Address. Type the server IP addresses in the related field.
Adding or Editing a User Account
Firebox X Edge users When you create a user for the Firebox X Edge,
you select the Administrative Access Level for that user. You can also
configure a WebBlocker account and MUVPN restrictions.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox.
The default IP address is: https://192.168.111.1
2 From the navigation bar, select Firebox Users.
The Firebox Users page appears.
3 Under Local User Accounts, click Add.
The New User page appears. It shows the Settings tab.
4 In the Account Name field, enter a name for the account. The
user enters this name when authenticating.
The account name is case-sensitive.
5 In the Full Name field, enter the first and last name of the user.
This is for your information only. A user does not use this name during
authenticating.