User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-187.png)
Updating the Firmware
User Guide 159
2 From the navigation bar, select
Administration > VPN Manager Access.
The VPN Manager Access page appears.
3 Select the Enable VPN Manager Access checkbox.
4 Type the status passphrase and then type it again to confirm in
the applicable fields.
5 Type the configuration passphrase and then type it again to
confirm in the applicable fields.
N
OTE
N
OTE
These passphrases must match the passphrases used in the VPN
Manager software or the connection will fail.
6 Select the Compatible with pre WFS 7.3 VPN Manager button
if you want to use WatchGuard System Manager 7.0, 7.1, or 7.2
to manage your Edge.
7 Click Submit.
Updating the Firmware
Check regularly for Firebox® X Edge updates on the WatchGuard
Web site:
https://www.watchguard.com/support/sohoresources
Two different methods exist for updating the firmware. One method
uses a slightly larger download and automatically updates the firm-
ware on the Firebox X Edge when run from any computer running
Windows. The other method uses a smaller download and allows