User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
![](/manual/watchguard-technologies/mf16s32e9w/user-s-manual-english/images/img-52.png)
Installing the Firebox® X Edge
24 WatchGuard Firebox X Edge
Setting a Static IP Address
If your ISP uses static IP addressing, you must set the Edge external
interface address. Use the information in the Your TCP/IP Properties
Table on page 14 to do this procedure.
1 Open your Web browser. Browse to the System Status page at
https://192.168.111.1.
Type the URL in the Address bar of your browser and press the [Enter]
key.
2 From the navigation bar on the left side, click the plus sign (+)
to the left of Network. Click External.
3 Use the Configuration mode drop-down list to select Manual
Configuration.
4 Type the IP address, subnet mask, and default gateway.
5 Type the IP addresses of the primary and secondary DNS servers.
6 Type the DNS domain suffix.
7 Click Submit.
Entering PPPoE settings
Many ISPs use Point to Point Protocol over Ethernet (PPPoE)
because it is easy to merge with dial-up infrastructure. If your ISP
uses PPPoE to give IP addresses, you must get more setup informa-
tion.